Electric Bicycle Precautions

Electric Bicycle has a vital impact on our production live, so what are the precautions related to Electric Bicycle? Let's take a look.

Here is the content:
Precautions for Electric Bicycle Maintenance
Things to note when using the Electric Bicycle

Precautions for Electric Bicycle Maintenance

First of all, pay attention to the cleanliness, especially the saltwater in winter (many cities spray salt water in winter after heavy snow to avoid icing) should be cleaned in time, otherwise, it is very easy to cause metal parts to rust and corrosion, paint aging off. Second, we should pay attention to the maximum adjustment height. After riding a new car for some time, according to the requirements of the manual, Electric Bicycle should be checked and adjusted. This time tightening and lubrication is essential. Check whether the fasteners are loose, whether the transmission parts are flexible, pay attention to the chain oil lubrication to wipe the floating oil, and flywheel point a little oil can. Tires should be properly inflated, otherwise, it will affect the comfort and service life of the Electric Bicycle. The brake is the basic guarantee of safety, so it should be checked at all times, and any problems found should be adjusted or repaired immediately.

Things to note when using the Electric Bicycle

1、Electric Bicycle should adjust the height of the saddle and handlebar before use to ensure the comfort of riding and reduce fatigue. The height of the saddle and handlebars should vary from person to person, generally, the height of the saddle is suitable for the rider to be able to land reliably on one foot (the whole car should remain upright), and the height of the handlebars is suitable for the rider to put the small arm flat and relax the shoulder and arm. But the saddle and handlebar adjustment should first ensure that the insertion depth of the overture and the riser must be higher than the safety mark line.
2、Electric Bicycle should check and adjust the front and rear brakes before use. The front brake is controlled by the right brake handle, and the rear brake is controlled by the left brake handle. Before and after the brake adjustment to the left and right brake handle to reach half of the stroke that can be reliable brake is appropriate; brake skin excessive wear, to be replaced promptly.
3、Electric Bicycle should check the tightness of the chain before the action. If the chain is too tight, the pedals will be hard to ride, but if it is too loose, it will be easy to shake and touch other parts. The drape of the chain is 1-2mm, which can be adjusted appropriately when riding without pedals. When adjusting the chain, loosen the rear wheel nut first, adjust the chain tightness by evenly turning in and out the chain adjusting screws, then tighten the rear wheel nut again.
4、Electric bicycles should check the lubrication of the chain before use. Feel and observe whether the chain shaft rotation is flexible and whether the rest of the chain links is serious. If the rust or rotation is not flexible, you should add the right amount of lubricant, and replace the chain if it is serious.
5, Electric Bicycle riding before, should check the tire pressure, handlebar steering flexibility, front and rear wheel rotation flexibility, circuit, battery power, motor working condition, as well as lights, horn, fasteners, etc. to meet the requirements of use.
6, Electric Bicycle try not to use zero starts (that is, in situ start), especially in the weight, and uphill should be prohibited. When starting, should first ride with human power, when a certain speed, and then turn to electric driving or direct use of electric driving. This is because when starting, the motor must first overcome the static friction when the current is larger, close to, or even reach the resistance current, so that the battery’s high current work, and accelerate the battery damage.
7, Electric Bicycle riding as far as possible when using human or electric assisted way, especially uphill, heavy, windy driving or road bumpy must be human riding to help. In this way, you can avoid the battery for a long time with high current discharge, damage to the battery is conducive to improving the range of a charge, and extending the service life of the battery.
8, Electric Bicycle does not adapt to bumpy or steep roads. If you encounter such roads, you should drive slowly or get off and push. In this kind of road, the motor, controller, battery, and another poor working environment will reduce the service life and easy to damage.
9、Electric Bicycle should avoid frequent braking and starting when driving, and should return the speed control handle before braking or at the same time, and try to use human power to ride in the area of road congestion. In this way, the Electric Bicycle battery can be avoided to be damaged by the high current when starting.
10、The standard load capacity of an Electric Bicycle is 75kg, avoid overloading as much as possible. If overload driving should use human riding, human helper way.

The above is about the Electric Bicycle-related precautions, if you are interested in Electric Bicycle, you can contact us, our website is https://www.shenyunscooters.com/.